New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

Yes as I said just the 7i76e.

What do you mean by this it depends if you press on up or down keys

Also on the Z axis it should show -ve when going down. But in the the homing routine you can make it go either way it depends where the switch is ie you can change the travel to seek the switch out.

You are wasting your time playing without the homing switches on. As I said baby steps

-ve right I have it +ve at moment, and I have the router on the X axis going left -ve, right +ve and the Y axis -ve away from the front and +ve towards the front where I load.

As long as the M3's come today they're on ;) the wiring is already in place and connected to the BOB and spade terminal the other ends.
Stuck at home for an hour so can't play waiting for the guy to come see why my boiler stopped working it's going to be the thermocouple it always is. The house I live in was built in the 1920's and it's bloody freezing without heating lol.

The other error I kept getting was joint following error which I traced to the PC isn't fast enough really played with different latencies and ferror settings to no avail but I do know this PC is utter crap so will swap a different one in.