New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

I noticed that your cy cable to the spindle is not secured in that every time the Z axis moves the cable gets bent at the plug. This is a major fail factor and might destroy the VFD as has happened a few time here. Can you put a supporting bracket from the Z front plate to fix it.

Yes I can, I had noticed of course but keep forgetting I actually unsoldered it and tried to sort it out but still ended up the same lol.

Luckily there's a lot of scrap kicking around the yard so sure I can find something to do the job or actually desolder it get the cable in properly and resolder.

I had to wire my control box like 4 times lol this is pretty standard for me although I am getting better each time.

After blowing up a transformer it would be good if I didn't blow up the vfd lol.

Every piece of advice you have given has turned out to be the correct choice so I've learnt to heed your advice lol just wish I'd spoke to you before I ordered my ballscrews.