Threaded View
-
22-08-2017 #11
Got PC and ran into problems but nothing too severe but like always nothing works first time.
Need to swap the motherboard to a new case so I change the PSU as the existing case has a weird small power supply and I'd lose 2 drive bays if I fit gfx card in this machine. Have old mini tower pc's kicking round so not a biggie just hassle.
The other problem my 700w power supply I bought the other day only has 1 6pin pci connector and the card needs 1 6pin and 1 8pin so had to order a dual molex to 8pin adapter which will take a day or 2 to come and that's annoying.
Nothing's ever easy when you're budgeting lol.
The original 300w power supply is one of these
http://www.ebay.co.uk/itm/FSP300-60E...gAAOSw3YJZO4uT
which I believe are very good quality power supplies so will keep for some future project or maybe just flog it it is 80 plus certified.Last edited by Desertboy; 22-08-2017 at 02:15 PM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
New Table Build, 12x6 work area, drawings up any advice?
By silverdrgn in forum Plasma Table MachinesReplies: 3Last Post: 23-01-2016, 07:34 PM -
BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
By lebies in forum DIY Router Build LogsReplies: 18Last Post: 19-08-2014, 12:00 PM -
BUILD LOG: Melbourne Andy CNC build 1220x810 work area
By AndyGuid in forum DIY Router Build LogsReplies: 4Last Post: 20-04-2014, 08:25 PM -
RFQ: acetal parts turned lathe work
By dazza in forum Projects, Jobs & RequestsReplies: 10Last Post: 13-06-2013, 10:15 AM -
Wanted - Regular work for reliable machine shop in Northants/Kettering area
By Narkedat90 in forum Opportunities Available & SoughtReplies: 4Last Post: 06-04-2013, 04:09 PM
Bookmarks