New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

Nice once Clive ;) but I don't want to wait that long just trying to ID them from Rapid online catalogue.

Hoping I can get them by Saturday so I can finish the wiring over the weekend have been busy last couple of weeks and she's so close to cutting now.


The drivers have 3 plug in sockets, 2 of my drivers are missing all the plugs, 1 of my drivers has 2 6 pin plugs but missing the 2 pin, the last driver has all 3 plugs.

e2a
I think this is one set of 6 (P1)
https://www.rapidonline.com/truconne...3-81mm-21-3094

Pretty sure the 2 pin plug is not needed for my application.

the other 6 pin (p2) I think is this one
https://www.rapidonline.com/truconne...-pitch-21-2844

Will try locally if I can't get them then will buy from rapid sure I can cut down a 6 pin to a 2pin if needed (Same pitch & profile)

e2a just ordered from rapidonoline as they don't have locally, got some CY cable as I was short so will have to wait for delivery but hopefully by Monday.

I assume I can use 2 core 0.5mm flexible cable from wilkos for wiring the AM882 drivers to the BOB?