New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

I am going to have a look at fixing the transformer, there's a good vid on you tube it doesn't look that hard if the fuse is near outside but at £41 for a 1kva I couldn't resist. Maplins still have a new 625va transformer (50v) for £30 which I'm seriously tempted (Have enough bits to make a 2nd PSU) and also try and fix the original one or they have an 800va (45v) for £35. I have 7 caps now and 2 new rectifiers so it's cheap PSU for betty bigger sister Already planning ;)

Would these be suitable slow blow fuses?
http://www.ebay.co.uk/itm/5-CERAMIC-...A3euImkU3PFBZg

These look plug compatible in which case I'll put the PSU on a plug for ease.

When I first got the Am882 it had a dodgy connection I changed the plug and it was fine but I do wonder if the connection is dodgy on the board open it up couldn't see anything from the top need to take it out properly and look underneath

I am going to complain to Chinese I bought it off as they "offered" 1 year warranty but also got it on my CC so will see if I can get a refund through them.

At the moment this is going to a normal plug socket which is connected to an MCB in the board (16amp) on a side note my shitty 24v psu tripped it so I chucked the PSU in the bin was £7 ebay special. But it didn't trip whenthe psu blew in fact it didn't even blow the 13amp fuse in the plug and my pc stayed on connected to same power in.