New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

This was a real bastard lol bolting the SBR25 into the aluminium extrusion with T nuts but now both rails are bolted on finally. They are both bolted very tight against the extrusion I'm hoping the extrusion is straight ;)

Also spent a few hours today ripping apart a machine and recovered

A working compressed air solenoid,
One of these http://www.solenoid-valve.world/coil...FXAA0wodbK8FfQ
Quite of a bit of aluminium plate 10 to 20mm thickto play with when the machine works and maybe make motor mounts.
Loads of A2's (I like recovering A2's as it gives me a large range of sizes to try and then I can buy the correct length in new if I don't have enough A2's for the project.)
Loads of push fit air fittings

The best things in life are free lol.