Quote Originally Posted by Ger21 View Post
Not sure if you've done this yet, but it won't make you're extrusion more rigid, or stronger, unless you try to crush it.
Hi Ger21, I'm the same person who posted on cnczone I remember your comments, since then I changed the design to use 3 pieces of extrusion 2 4545 and 1 4590 profile bolted in a straight vertical line they are all the heavy duty profiles and I am embedding the extrusion 5mm into the gantry mounts both sides (Plates are 20mm thick).

I won't epoxy the gantry but I might fill the 4590 extrusion cavity (This is a large one 4l's in volume) with sand on advice from some crazy Germans ;) Who claim it can have a big effect on reducing vibrations.