New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Nr1madman]

If I understand you correctly it would work but you will only be able to home one axis at a time.. this is something I think about aswell for my build.
The way I think I'm gonna go is with one more bob to get inputs to use them separately :)

Skickat från min SM-N910C via Tapatalk

[Desertboy]

Got the limit switches wired up and the Y axis limit switch cable fed through the energy chain which meant removing it, it's a very tight fit ;)

Spent ages on little bits like making sure the CY cable is well supported, cabling is fed nice and neatly back to the control box.

Also spent 2 hours stripping some copper radiator water cooling units from a massive control box going to keep one to cool my spindle and sell one they're chunky things.

Going to go back in an hour and see if I can get the CY cable and spindle cable on tonight and move the PC down and connect up the power, etc. So tomorrow morning I can start playing, need to think about where to mount my VFD and copper rad.