. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-11-2017 #11
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 14-06-2025 Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    A lot of frustrating hours later still no movement but we have discovered that my parallel port pci card only works in serial mode!

    After much research I've bought a 2nd hand 2 port PCI parallel port card with a compatible chipset for both mach 3 and linuxcnc, 2 male to male cables and a 2nd BOB. (It's a Netmos)

    After Xmas I'm going to get a usb BOB, are these any good?

    https://www.ebay.co.uk/itm/EU-Stock-...c=1&rmvSB=true

    Or should I plump for a better controller.

    I'm going to strip everything out and rebuild it better in another case lol and add in CY cable 2 core for the microswitches.
    Last edited by Desertboy; 08-11-2017 at 01:14 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Table Build, 12x6 work area, drawings up any advice?
    By silverdrgn in forum Plasma Table Machines
    Replies: 3
    Last Post: 23-01-2016, 07:34 PM
  2. BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
    By lebies in forum DIY Router Build Logs
    Replies: 18
    Last Post: 19-08-2014, 12:00 PM
  3. BUILD LOG: Melbourne Andy CNC build 1220x810 work area
    By AndyGuid in forum DIY Router Build Logs
    Replies: 4
    Last Post: 20-04-2014, 08:25 PM
  4. RFQ: acetal parts turned lathe work
    By dazza in forum Projects, Jobs & Requests
    Replies: 10
    Last Post: 13-06-2013, 10:15 AM
  5. Wanted - Regular work for reliable machine shop in Northants/Kettering area
    By Narkedat90 in forum Opportunities Available & Sought
    Replies: 4
    Last Post: 06-04-2013, 04:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules