New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Nr1madman]

I think its like this


Skickat från min SM-G955F via Tapatalk

[Desertboy]

That's my board so we'll see tomorrow ;)

Really liking the 3d mouse gives you so much more control over how you view your model.

[Desertboy]

Going down to south park ;)

[Nr1madman]

Going down to south park ;)

Make it, show it, love it!

Skickat från min SM-G955F via Tapatalk

[Davek0974]

The southpark figures are 3d illustrations?? The wood grain looks wrong to be real cuts?

[Chaz]

The southpark figures are 3d illustrations?? The wood grain looks wrong to be real cuts?

Renders from within Fusion 360. Shows how good they are, the need to check / question :-)

[Desertboy]

The southpark figures are 3d illustrations?? The wood grain looks wrong to be real cuts?

Chaz is right there Fusion 360 models I then "coloured" using different woods in physical material.

I was playing with different ways of making cad models from bitmaps

The South Park figures were a simple spline trace over a canvas, Obey from They Live (Cracking film) I used Inkscape trace bitmap function to vectorize the image then used the SVG to extrude from.



This is one I did from a photo of a friend this took a fair bit of processing in both gimp and Inkscape before I could get a usable extrusion will need cleaning up before I make it.

Also going to check out image2gcode built into linuxcnc to see what engraving fun I can have ;)

[Desertboy]

Was playing in fusion only took 40 mins but not sure how I'd drive the long axis, I think needs to be R&P but have no idea how to set up a dual pinion anti backlash setup. The other choice 2* 2.7m 2510 ballscrew's with rotating ballnut's as at the length it's going to be a skipping rope if I try and rotate the screw.

Does anyone know how I invert the axis in linuxcnc? Using the beta dual ballscrew on the Y so need to edit the hal or .ini to do it as the wizard doesn't support dual motors.


Alright Fusion buffs when I copy an object how do I break the association so my edits to the new object do not effect the original?