New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Desertboy]

Very impressed with the cut from the 2 flute 6mm end mill on the laminate I was expecting mega chipping.



Because I only clamped one side it wasn't even so the white wasn't milled out properly but it was only a test with some scrap so happy how it came out as soon as my clamps come (Ordered 4 toggles clamps going to use 2020 extrusion across the bed instead of steel.)



Need to flatten the mdf bed as well, gong to get a 1/2" trend straight router bit to do this as it will be a lot quicker.