Threaded View
-
29-04-2017 #7
Last Activity: 15-12-2024
Cheers Clive..!
That's me being dumb again...!
If it helps anyone else reading this:
The output is the relay contacts RATED at 24V 3A and not outputting anything. ie the relay is just a switch that changes state. So the control circuit runs off 12V and you can run the air valve off 12v through the relay.
Thanks again Clive!
Wal.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: First timer
By bofred in forum New Member IntroductionsReplies: 4Last Post: 01-12-2014, 09:23 PM -
EMI Filters, any purpose in a diy control circuit?
By GTJim in forum General ElectronicsReplies: 6Last Post: 14-03-2014, 11:38 PM -
Custom Vacuum Table 'Hold Down' System - piping/valve advice
By FlightCaseCo in forum Machine DiscussionReplies: 4Last Post: 16-01-2012, 06:56 PM -
TB6560 > Timer > GMFC
By Theo in forum Motor Drivers & ControllersReplies: 0Last Post: 17-10-2010, 06:59 PM -
NEW MEMBER: Old timer, still learning, Virginia, USA
By GerryR in forum New Member IntroductionsReplies: 1Last Post: 13-10-2010, 10:41 PM
Bookmarks