My UCCNC probing screen and macros

[A_Camera]

I made some changes because it seems that the two user fields I used did not work as I expected, but when I changed the type to "fieldnb" type it works without issues. I also created some ssf files for a few controllers, if you have any of those then installation is really simple. Note that I will not post a direct link to the files and you can only access them through my blog post link. The reason is simple, by doing this change I realized that if I am going to any more changes I will eventually lose tracks of where I posted a link, and which links are updated. I will keep my blog post updated and link to that instead, this is much easier for me.

https://adapting-camera.blogspot.se/...nd-macros.html

Note that you will need both zipped files, one contains the macros and the images, the other the ssf and text files.

[A_Camera]

I chose to remove this post because I suspect the new installation routine has some problems. Use the one on my blog until further.

[jmac80]

Hello @a_camera
Got a custom made cnc router with a UC300eth and ub1 bob running on uccnc.
In the post today I got the stepcraft 3d prober tool.
Going to try and get this working this weekend.
Not entirely sure on the wiring and looking for documentation about it so I shall be trawling the internet.

[A_Camera]

Hello @a_camera
Got a custom made cnc router with a UC300eth and ub1 bob running on uccnc.
In the post today I got the stepcraft 3d prober tool.
Going to try and get this working this weekend.
Not entirely sure on the wiring and looking for documentation about it so I shall be trawling the internet.

Hi. Good luck with your machine. Unfortunately I don't know how to wire that thing so I can't really help you out.