1200mmX900mmX170mm 4axis cnc

**Nickhofen** · 12-02-2018

Where can I find HDT5 pulleys with 10mm bore, any suggestion?

**Chaz** · 12-02-2018

Originally Posted by Nickhofen

Where can I find HDT5 pulleys with 10mm bore, any suggestion?

http://www.beltingonline.com - Very good to deal with.

**Nickhofen** · 12-02-2018

Originally Posted by Chaz

http://www.beltingonline.com - Very good to deal with.

Thanks for the reply, are there any pulleys with a 10 mm hole already in the middle,or I am missing something,I can find only with 6 and 8 mm HDT5 pulleys at beltingonline.

**Clive S** · 12-02-2018

Originally Posted by Nickhofen

Thanks for the reply, are there any pulleys with a 10 mm hole already in the middle,or I am missing something,I can find only with 6 and 8 mm HDT5 pulleys at beltingonline.

They quite often just have pilot hole but have you asked them if they can bore them out for you, don't forget grub screws

I have just checked http://www.beltingonline.com/20-toot...20-5m-15f-7776 there is an option for the boring and grub screw holes. bit expensive thou , not hard to do.

**Davek0974** · 12-02-2018

Originally Posted by Clive S

They quite often just have pilot hole but have you asked them if they can bore them out for you, don't forget grub screws

I have just checked http://www.beltingonline.com/20-toot...20-5m-15f-7776 there is an option for the boring and grub screw holes. bit expensive thou , not hard to do.

I usually let them do it, its a bit of faffing about that i can do without for the sake of 3 or 4 quid, plus getting the grub screws as well :)

**Nickhofen** · 12-02-2018

Thanks guys, I just login to report that I saw that there is an option for modifying bore etc. and see your answers!

**Nickhofen** · 24-02-2018

https://www.aliexpress.com/item/1PC-...ceBeautifyAB=0

I found those at aliexpress, they are made from aluminum alloy come with 10mm bore and two screw holes.
I am going to use 1/1 ratio for X Y and 1.5/1 for Z , are those any good, anyone has experience with those?
Any suggestions about the belts?

**wallyblackburn** · 12-02-2018

Originally Posted by Nickhofen

Where can I find HDT5 pulleys with 10mm bore, any suggestion?

Not sure if this helps, but I just ordered some on eBay in US. from China:

https://www.ebay.com/itm/HTD-5M-20T-...72.m2749.l2649

I figured they wouldn't ship until after Chinese New Year, but they are supposedly on their way. Obviously, I can't yet speak to quality...

Regards,
Wallace