. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2017 #9
    Nickhofen's Avatar
    Lives in Piraeus, Greece.
    Nickhofen
    Last Activity: 2 Days Ago Has been a member for 7-8 years. Has a total post count of 401. Received thanks 68 times, giving thanks to others 183 times.
    Quote Originally Posted by Nr1madman View Post
    Hello !
    I think you (or me) has misunderstood..
    The bearings on x axis your long axis should be wider preferably so that the tip of the cutter is between them when viewing the machine from the side.
    The y axis bearings on gantry can be closer.

    If you use 90x90x4 steel with no welding, how will you close the ends to be able to bolt there?
    How close can be the bearings on the gantry so I can have good accuracy and eliminate the tolerance when torgue applied on Z axis ?
    The ends of the tubes is going to be welded with steel flanges, I prefer minimum welding for minimum stress and to be able to adjust- align everything.
    Last edited by Nickhofen; 02-08-2017 at 09:54 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

Similar Threads

  1. cnc 4axis hot wire mach3;
    By maikonesk in forum Hotwire Cutting Machines
    Replies: 3
    Last Post: 07-08-2015, 02:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules