1200mmX900mmX170mm 4axis cnc

[Nickhofen]

Welding time!
Workshop is so small even with the extension, that I can not take a full photo of the cnc table,lol , behind me you can see the old wall,it is where are the bricks, the extension is behind it where the blue curtain is.
80x80mm square tubes were used, for bracing I am going with 50x50mm.

[Nr1madman]

Haha go go weldmaster :D

You will soon have use of all planning!
Lets not have a race.. have a feeling you will be ready before me ;)

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

No way!!! I have no motors, spindle ,not catted the alu plates etc....So, no way! hahaha!!!

[Nickhofen]

Does any one have a good supplier for 2.2kw VFD spindle ? And 4nm nemma 23 motors with 8 cables?

[Nickhofen]

Anyone?

[Nr1madman]

4nm motors can be bought from cnc4you.co.uk or zapp automation :) those motors have good specs compared to ebay versions.. the ebay motors usually have high inductance.

Spindle + vfd seems more like a gamble..
Same sellers often ship different quality. Sometimes 3 bearings sometimes 4.
Sometimes with connected earth sometimes without.
No tips for you here....

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

Thanks Robert, so the spindle guestion is still a mystery,lol!

[Davek0974]

Thanks Robert, so the spindle guestion is still a mystery,lol!

Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.

[Nickhofen]

Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.

Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!

[Clive S]

Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!

Try this https://www.ebay.co.uk/itm/2-2KW-WAT...8AAOSw-W5Us1mz