1200mmX900mmX170mm 4axis cnc

[JAZZCNC]

At Z I have 1605 ballscrew what rate is recommended to use at the pulleys 1:2 maybe?

With 5mm pitch go with 1:1 ratio. This will give you good balance of speed/resolution.

[Nickhofen]

With 5mm pitch go with 1:1 ratio. This will give you good balance of speed/resolution.

Thanks Dean, I will do that!

[Nickhofen]

I start cutting and drilling parts from 20mm mdf to see if they fit right, after that I am going to use the mdf parts and my router table to shape the 20mm aluminium.