Thread: 1200mmX900mmX170mm 4axis cnc
Hybrid View
-
22-06-2018 #1
Last Activity: 08-09-2024
Cut the second base for the x axis motor,the right angle is from the aluminium beams,I cut the length I wanted and then separate the square to two angles,each one for each x axis motor.
Last edited by Nickhofen; 22-06-2018 at 05:50 PM.
-
The Following User Says Thank You to Nickhofen For This Useful Post:
-
22-06-2018 #2
Last Activity: 08-09-2024
Do you guys prefer to mount the electronics direct at the electronic box with screws and nuts, or first on an mdf and then in the box?
-
22-06-2018 #3
Last Activity: 14-02-2026
Myself - a steel plate mounted on stand-offs mounted into the case. That way you can remove the whole assembly to work on.
Last edited by Doddy; 22-06-2018 at 05:54 PM.
-
The Following 2 Users Say Thank You to Doddy For This Useful Post:
-
22-06-2018 #4
Last Activity: 08-09-2024
Steel plate for ground issues,or because it is more stable?
-
22-06-2018 #5
Last Activity: 14-02-2026
It's cheap. Just like me!
Last edited by Doddy; 22-06-2018 at 06:59 PM.
-
The Following User Says Thank You to Doddy For This Useful Post:
-
22-06-2018 #6
Last Activity: 08-09-2024
Originally Posted by Doddy
-
The Following User Says Thank You to Nickhofen For This Useful Post:
-
23-06-2018 #7
Last Activity: 14-06-2025
The electronics box I got out the skip had a steel plate in it so I used that, the box is made of GRP. Originally Posted by Nickhofen
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
The Following User Says Thank You to Desertboy For This Useful Post:
-
23-06-2018 #8
Last Activity: 08-09-2024
Hey where have you been? Originally Posted by Desertboy
What is GRP?
-
23-06-2018 #9
Current Activity: Viewing Cheap milling machine spindle - BT30-ER20, air powered draw bar + Tear Down!
Glass Reinforced Plastic (or fibre glass) Originally Posted by Nickhofen
Last edited by routercnc; 23-06-2018 at 07:37 PM.
-
The Following 2 Users Say Thank You to routercnc For This Useful Post:
-
23-06-2018 #10
Last Activity: 14-06-2025
Got busy at work, these unreasonable customers wanting things lol. Originally Posted by Nickhofen
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cnc 4axis hot wire mach3;
By maikonesk in forum Hotwire Cutting MachinesReplies: 3Last Post: 07-08-2015, 02:15 PM
Bookmarks