1200mmX900mmX170mm 4axis cnc

[Nr1madman]

Nice! What wood is used for the handle? :D

Been watching alot of YouTube vids about knifemaking so maybe I should give it a go aswell ..?

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

Hi Robert.
The handle is made from root of Olive tree,those trees are very common here.
Do you watch the competition "Forged in Fire" also? ;-)

[Nickhofen]

After some reading at old threads I place the last orders at Aliexpress for contactor, relays, slow blow fuses, power supplies etc.
I want to say a big thanks to routercnc and driftspin for the help they offer at the backstage, and all the other people of course that keep answering my silly questions! :)

[routercnc]

Can’t remember what I did but you are welcome. Just passing it on . . .

[Nickhofen]

I am thinking to place the parts that way in the control box,will it be any problem with the positioning of VFD?
If I remember correctly people puts shielede cables to the signal wires ,wires that goes to controllers, motors etc. right?

[Chaz]

I am thinking to place the parts that way in the control box,will it be any problem with the positioning of VFD?
If I remember correctly people puts shielede cables to the signal wires ,wires that goes to controllers, motors etc. right?

The manual for each device will tell you what spacing you need for cooling, follow that.

[Clive S]

I am thinking to place the parts that way in the control box,will it be any problem with the positioning of VFD?
If I remember correctly people puts shielede cables to the signal wires ,wires that goes to controllers, motors etc. right?

I personally prefer the VFD outside of the control box. The spacing on the drives are fine I tend to use cat3 twisted for the signal wires and CY 4 core for the motors the shield grounded to the star point at one end only

[Nickhofen]

Thanks guys!
Clive CY4 core for the motors and parallel wiring for the motor's coils right?