Thread: 1200mmX900mmX170mm 4axis cnc
Hybrid View
-
04-05-2017 #1
Hi Nick,
I'm still learning, but some of the best bed frame designs I've seen have a bed which attaches to the legs with screws, so you can change the height of the bed, or swap it out for a different one in the future. The other thing I thought was quite sensible would be room at the front and sides for sliding large pieces in underneath to work on their edges - looks like you've hit the nail on head already for that one though!
Hope that helps!
-
04-05-2017 #2
Hi Andy.
Somehow I miss your post earlier.
Thanks for the comments, I read other's guys threads here and I am stealing ideas, I hope this is not inappropriate. :-).
Something I forgot to mention is that at the one end of the bench ,that is at a lower lever is for the rotating axis.Last edited by Nickhofen; 02-08-2017 at 04:10 PM.
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
cnc 4axis hot wire mach3;
By maikonesk in forum Hotwire Cutting MachinesReplies: 3Last Post: 07-08-2015, 02:15 PM
Bookmarks