1200mmX900mmX170mm 4axis cnc

[Nr1madman]

OK when you quote for the screw you tell him the total length (including the F length) and say what F length you want, the standard is about 15mm but that is not enough so ask for the F length to be 30mm (this is the bit where the pulley will fit).

If you PM me your list I will format it for you so that Fred will understand it. You also have to ask for grease nipples.

I totally missed the grease nippel. Does anyone know where to get some? :)

Skickat från min SM-N910C via Tapatalk

[Nickhofen]

I totally missed the grease nippel. Does anyone know where to get some? :)

Skickat från min SM-N910C via Tapatalk

Robert you can find those at Fred's store, BST Automation at Aliexpress.

[Nickhofen]

Not really an update but I have a good finding that I would like to share.
A friend of mine gave me three of those aluminium beams that he found as reinforcements in a box that had inside a big ladder !
It is like early Christmas, how can I use them at my build ?
First think that came to my mind is to cut the small square tube, the one that is weld perpendicular to the long one and use it as base for the motors and cut longitudinal the long part ,and use it as a support to L beam of Y axis?
Any thoughts ?

[Nr1madman]

Robert you can find those at Fred's store, BST Automation at Aliexpress.

Thanks for the tip. Turns out I had some in my shed, turned out nice :D
Still haven't found any local place to buy suitable lithium grease :(

Skickat från min SM-N910C via Tapatalk