Thread: 1200mmX900mmX170mm 4axis cnc
Hybrid View
-
28-12-2017 #1
Last Activity: 08-09-2024
I made a pass from the table router and cut the aluminium angle straight , something that wasn't possible with the cutting grinder.
Aluminium angle is 5mm thick, I believe it is going to add something to the construction,I hope stiffness and not only weight!lol!!!
Last edited by Nickhofen; 29-12-2017 at 08:00 AM.
-
The Following User Says Thank You to Nickhofen For This Useful Post:
-
29-12-2017 #2
Last Activity: 14-06-2025
Nice ;)
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
The Following User Says Thank You to Desertboy For This Useful Post:
-
30-12-2017 #3
Last Activity: 08-09-2024
I use the end mill chamfering with sunk to prepare the holes,then screw the aluminium angle in place, the axis weight now 8.7 kilos.
I am planing to use Nema 23 4NM,any thoughts?
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cnc 4axis hot wire mach3;
By maikonesk in forum Hotwire Cutting MachinesReplies: 3Last Post: 07-08-2015, 02:15 PM
Bookmarks