1200mmX900mmX170mm 4axis cnc

[Nickhofen]

Yellow and black is a cool commination and maches with my bandsaw and thickness planer I have .lol!
Also those are the colors of the football team my son support, the colors i choose is a surprise for him!

[Nickhofen]

I am ready to pull the trigger and order 4x Nema 23 4NM from cnc4you.co.uk , any preferences for a breakout board from there and maybe for drivers?
Or what ever I can order all in once so I wont pay the shipping cost twice, thanks!

[Nr1madman]

I am ready to pull the trigger and order 4x Nema 23 4NM from cnc4you.co.uk , any preferences for a breakout board from there and maybe for drivers?
Or what ever I can order all in once so I wont pay the shipping cost twice, thanks!

Personally I did not like their electronics. Nothing seemed like a bargain :)
Have you thought about motion controllers or/and BOBs?
Was thinking of getting pulleys from there but when I ordered they didnt have htd pulleys. Dont know if they have them now?

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

Breakout board is in the list, pulleys is a good idea, I just check and see that they have some!
Thanks!

[Nickhofen]

When you measure the depth of nut housing bracket for ordering your screws, remember that the tapering stops 3 to 4 mm before the maximum depth.
I realize that a little bit late but the fix was easy...

[Nickhofen]

And here is a useful article for guys who do not know (me), how to assembly the ballscrew with the BF and BK bearing blocks!

http://www.hobbycncaustralia.com.au/...1Ballscrew.htm