. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 08-05-2017 #1
    MrBurns's Avatar
    Lives in Manchester, United Kingdom.
    MrBurns
    Last Activity: 08-05-2017 Has been a member for 8-9 years. Has a total post count of 5.
    Hello,

    I have some PoKeys devices for sale. I bought these for a project but have since gone in a different direction and they're not being used.

    In case you don't know, these units are motion controllers compatible with Mach3 and Mach4. I've tested them under both and they seem to work very well.

    PoKeys 57CNC: £130 inc. postage
    This unit has been powered up and tested but never actually used in a machine. Immaculate condition.
    http://www.zappautomation.co.uk/elec...keys57cnc.html

    PoKeys 57E: £60 inc. postage
    Ethernet motion controller. This has had a bit of use for testing. In very good condition.
    http://www.zappautomation.co.uk/elec...pokeys57e.html

    PoKeys OC16: £14 inc. postage
    Provides 16 additional outputs capable of driving 24V relays. Tested but never used.
    http://www.zappautomation.co.uk/elec...xtbusoc16.html

    PoKeys ExtBus 16 CNC: £14 inc. postage
    Allows up to 8 motors to be driven by Step and Direction @ up to 125kHz. Never used.
    http://www.zappautomation.co.uk/elec...usoc16cnc.html

    If you'd like to buy the lot I'd be happy to sell it for £200 in.c postage
    Last edited by MrBurns; 08-05-2017 at 03:29 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Higher end Chinese controllers?
    By m_c in forum Motor Drivers & Controllers
    Replies: 51
    Last Post: 22-10-2016, 10:04 PM
  2. Comparing motion controllers...
    By JW1977 in forum Control Hardware & Systems
    Replies: 34
    Last Post: 17-02-2016, 02:36 PM
  3. Wiring Steppers to controllers
    By liamo1991 in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 05-09-2013, 01:58 AM
  4. PCI Motion Controllers
    By IanS1 in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 16-05-2013, 12:13 AM
  5. Difference between controllers and Cad/Cam programming???
    By 0625272 in forum Computer Software
    Replies: 0
    Last Post: 23-06-2011, 08:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules