. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2018 #16
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 26-02-2025 Has been a member for 7-8 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Quote Originally Posted by Karl View Post
    OK, rightly or wrongly I've just ordered one of these spindles from Germany.

    So now I need to:
    • Source a bracket - recommendations please -?
    • Learn how to configure and operate the spindle - I'm sure there's an article or 2 on this site somewhere - ?
    • Absorb recommendations etc from folks who have such a device - ?


    Hoping folks can point me in the right direction.

    Karl
    That's the one I have

    Something like this is good
    https://www.ebay.co.uk/itm/80-100mm-...QXW0C2j_rVrnVg

    Mine took about 10 working days to arrive.

    If you wire it to the BOB to control speed and turn on/off then there's not a lot to setup on the VFD I haven't done this yet so control the speed from the VFD but it makes more sense to wire it to the BOB.

    The manual is confusing but there's a great thread on cnczone about how to use the vfd and all the info you need is in the manual just in Chinglish.
    Last edited by Desertboy; 03-05-2018 at 10:50 AM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help me choose a mill.
    By Fingerpuk in forum Milling Machines, Builds & Conversions
    Replies: 12
    Last Post: 25-11-2016, 12:41 AM
  2. Which CNC Router to choose, and what are the costs
    By Painted Letters in forum Machine Discussion
    Replies: 5
    Last Post: 29-06-2016, 03:54 PM
  3. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  4. HELP:How to choose
    By sinograver in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 17-10-2011, 02:00 AM
  5. How to choose a lead scew
    By GTJim in forum Lead Screws, Nuts & Supports
    Replies: 2
    Last Post: 15-02-2009, 12:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules