-
25-05-2017 #1
For Sale CNC Router 1300mmx1300mmx150mm working area
Self Build with much help form JazzCNC on here, for personal reasons has not been used much (a few hours). Comes with Computer with Mach installed and Custom made work bench. Bed is busboard and 18mm MDF.
Tested to commission stage but will require some calibration and final setup
1700mm x 1450mm x 850mm
1300mmx1300mmx150mm working area
Kress 1050 FME spindle
25mm x12mm pitch ball screws and fully supported rails
150mm travel on the vertical z axis
Rigid Aluminium Frame from section and plate
Full pc & monitor with mach 3 pre installed
Nema 3.1NM motors with stepper drivers and power
Custom Made workbench included
Supply not enclosed
Cabling requires boxing
Some calibration required
Please PM me with sensible offers Please
-
15-07-2017 #2
Could i ask a rough estimate on what you would like im not very good with offers.
Thankyou
-
16-07-2017 #3
Hi There Yes it is still for sale I've sent you an email
-
17-07-2017 #4
Have you sold this yet, if not can you send me more detail please including a rough price your looking for and area it is to be collected from.
thanks
Paul
-
19-07-2017 #5
Hi Paul
I've PM'd you
-
23-07-2017 #6
Hi! If machine still unsold please send me your price and location. Thank you
-
30-09-2017 #7
hi , is this still available?
-
30-09-2017 #8
Hi yes it is still for sale but have had quotes from 2 companies who deal with cnc machines, and parts ect and both have offered quite good prices for it, I am just waiting to hear back from them, also would like to try finish my conversion first before I sell this part.
-
02-10-2017 #9
Hi There yes it is PM me for details thnx
-
02-10-2017 #10
thanks for replying, can you pm me with your price and where you are please? cheers
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hello from Portsmouth area
By Crazy L in forum New Member IntroductionsReplies: 11Last Post: 22-06-2017, 09:46 AM -
BUILD LOG: Aluminum profile and alu plate 1500mm x 600mm x 150mm working area, first cnc.
By pierantoine in forum DIY Router Build LogsReplies: 36Last Post: 01-04-2017, 11:33 PM -
Advice on Mammoth CNC Router Build - Steel Framed - 2440mm x 1220mm cutting area!
By Wejjmeister in forum Gantry/Router Machines & BuildingReplies: 87Last Post: 03-01-2016, 12:45 AM -
Melbourne Andy CNC 1220x810 working area
By AndyGuid in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 17-04-2014, 11:41 AM -
NEW MEMBER: Hi from Beds area
By deannos in forum New Member IntroductionsReplies: 1Last Post: 04-11-2010, 11:37 AM
Bookmarks