Warco GH1224VS

[youngblood]

Last night I was looking at the potentiometer on line. I thought it turned a lot but now think its a ten turn type? where do I find the optical sensor? I think ill buy a new potentiometer anyway they are cheap enough. I just hope I haven't screwed up the settings on the key pad? and don't no how to reset it?

[cropwell]

Now I have some further information, it appears I cannot help you. The optical sensor will be on the main shaft of the lathe. I can't find any info on the 1224VS, have you talked to Warco, they are generally helpful.

[youngblood]

Will be giving them a call tomorrow. thanks anyway

[youngblood]

Spoke to Warco today they have no spares for electrical parts on this machine they did send me a manual for the inverter, so hope I can work out what needs to be checked. The inverter is a Sunfar C300 they tell me? it may help others who get in trouble

[youngblood]

Good news lathe is working took the panel off the back and found a sticky E stop next to the inverter.

[Lee Roberts]

Glad you got it sorted I was going to suggest lose wire after the move, thanks for sharing for others.