Thanks guys for your intrest in my project.


Ok i really have to start a build log.. but maybe make one later and keep that clean..

I guess starting a build log is ok after basic bed frame is done.. current progress state is clean up after welding.

I am not sure about epoxy leveling the bed before or after making the legs.

I would bold the legs to the floor, spirit level the bed , and then pour the epoxy on bed and x axis and 1 side of the gantry y axis. flip the gantry pour the other side.

Bed frame is 1850mm x 1160mm
z will be +/- 200mm depending on expoxy thickness on gantry

Box section is 80x80x4 and 120x80x4


so.. 1000mm x 1500mm x 200mm