-
04-06-2017 #1
Hi I bought 8 cheap ass chinese bearings from ebay and they all slide beautifully but 4 of them were fitted off centre so when on the rail we get this (I already fixed one of them that's why only 3 are bent).
We ID'd the problem
the plastic bearing houses are not fitted straight inside the aluminium housing.
so I took an aluminum strip 5mm thick and the put the bearing in the vice open side down using the strip to protect the outside shell and tightened. Which pushed the internal ring in a straight position it was incredibly easy.
I will update will pics in a few hours of how I did it and the difference, I managed to get 7 straight bearings out of the 8 I bought but I will have another go today with the 8th As I went a bit far yesterday with tightening the vice and and I need to push it back the other way.
I also decided to test how much weight the 15mm hiwin rails can take so I stood on the carriages and almost fell on my ass lol. After standing on 4 I tried standing on 2 and one of them shot off and I ended up standing on a single carriage ;) it was still super smooth to an almost lethal level.Last edited by Desertboy; 04-06-2017 at 09:41 AM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
04-06-2017 #2
Last edited by Desertboy; 04-06-2017 at 03:47 PM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Looking for a Dirt Cheap Chinese CNC to Run a Business & Make a Fortune With
By magicniner in forum General DiscussionReplies: 7Last Post: 05-04-2016, 09:36 PM -
taper roller bearings vs deep groove ball bearings
By dsc in forum Linear & Rotary MotionReplies: 8Last Post: 10-03-2014, 08:06 AM -
Cheap chinese USB controller.
By mocha in forum Marketplace DiscussionReplies: 0Last Post: 14-12-2012, 05:50 PM -
FOR SALE: Vee Bearings.. 16 off un-used...
By fasteddy in forum Items For SaleReplies: 4Last Post: 21-06-2011, 09:01 AM -
Bearings(Rotary)
By GeorgeD in forum Linear & Rotary MotionReplies: 7Last Post: 14-08-2010, 05:50 PM
Bookmarks