. .

Thread: Y axis problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 24-08-2017 #1
    Kev2960's Avatar
    Lives in Rugby, United Kingdom.
    Kev2960
    Last Activity: 01-04-2019 Has been a member for 7-8 years. Has a total post count of 125. Received thanks 7 times, giving thanks to others 1 times. Referred 1 members to the community.
    Thanks Robin, I see where your coming from, but the feed is only 200 mm/m and the rapid to position is 1500 mm/m. Could it be a driver fault ?
    Reply With Quote Reply With Quote
  2. 24-08-2017 #2
    Robin Hewitt's Avatar
    Lives in Seaford, Sussex, United Kingdom.
    Robin Hewitt
    Last Activity: 17-08-2025 Has a total post count of 1,618. Received thanks 109 times, giving thanks to others 7 times. Is a beta tester for Machinists Network features. Referred 1 members to the community.
    You need to mark the motor shaft, do the cut, return to the start position, see if the mark has moved. That will tell you whether the fault is before or after the motor.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Z axis problem
    By Kev2960 in forum Chinese Machines
    Replies: 12
    Last Post: 19-02-2017, 10:09 PM
  2. Help with Problem X axis Stepper Please
    By howser37 in forum Gantry/Router Machines & Building
    Replies: 53
    Last Post: 09-02-2017, 06:31 PM
  3. Problem with my Z axis
    By mikem in forum Stepper & Servo Motors
    Replies: 4
    Last Post: 03-11-2015, 11:52 PM
  4. Redsail laser engraver x axis problem
    By sthdklen in forum Laser Machines & Building
    Replies: 4
    Last Post: 21-03-2015, 03:44 PM
  5. z axis problem on rye ma 1500 with a bosch cc100
    By rickybabe in forum Rye CNC Routers
    Replies: 3
    Last Post: 28-04-2010, 09:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules