Mach3 Auto Tool Zero help

[Ger21]

Are you entering the sensor thickness into the gauge height DRO?

[piper1]

Hi Gerry thank you for the reply.
I have tried to enter the sensor thickness in the DRO (Z axis) on the front screen but it cancels out when i select the GOTO button.
I also tried entering it in the VB Script “Call SetDro (2,GageH) 'DRO(2)=Z DRO”
To be honest i don't have a lot of knowledge in the subject

[piper1]

I've Manged to work out the issue.
The sensor thickness in the Offset colum didn't save the thickness reading.

Thank you
Kev

[Ger21]

I have tried to enter the sensor thickness in the DRO (Z axis) on the front screen but it cancels out when i select the GOTO button.

No.
The macro is looking in the Gage Height DRO for the sensor thickness. If you don't have it entered there, it's not going to work.