Mach 3 software or another program?

[Saracen]

> Acceptable software:only CNCUSB

The fact that it came from China and only runs CNCUSB means it's probably based on a cloned Mk1 Planet-CNC controller and Planet-CNC will not support it in any way.

http://forum.planet-cnc.com/viewtopic.php?f=2&t=520

This was their stock response to people asking for support for one of these boards:

"Looks like you have one of Chinese counterfeit boards: viewtopic.php?f=2&t=520
We do not support these boards and therefore we cannot be responsible for any hardware or license malfunction.

You should turn to support and help to your merchant/seller that sold you this product.

However license that we provide should work with these controllers.

These boards are based on our first Mk1 controller which is obsolete and is not supported.
Many of its features are outdated and there is no software/firmware development.
It has a small buffer and weak processor, which reflects on bad machine performance.

You can purchase original controller or license in our web shop:
http://planet-cnc.com/products/"


The licence costs 69euros, plus VAT if applicable.

Adrian.