Many thanks.

What do you think about power output. I'm running the 2 AM822s at 5.8A RMS (actually, I think that once I have the interface cable I'll programme the drives to 5.5A RMS (2.8 x 1.96) - but that's splitting hairs) so that's total RMS current of 11.6A. The AM822 manual says that 50-70% of the motor current will be sufficient.

So 2 x 5.5A = 11.0A. 50-70% = 5.5-7.7A x 70v = 385-539VA. So a 500VA transformer should be OK?

Does that sound right or should I be working with the AC output voltage of 50v?

I see that Joe used a massive 750VA transformer.