Its said many times in the forum : DO NOT BUY before you know what you are doing.

Anyway, you can buy their board and buys separately better drives for the motors and make the box.

There is also the http://cncdrive.com/UCCNC.html which people report is a very nice solution. They have all components also. Ethernet connection, which is better than USB.



I have a feeling you are going to make some other mistake, so why dont you stop, take a minute and start from point 0. Buy a multi meter and check connections. Whats the hurry? I also was in you situation with my first machine and it took me some time to figure whats happening.