Small CNC Lathe

[Ba55foreva]

Hey. Is it single phase? What's the foot print?

[Chaz]

Yep, it runs off single phase. Ill do some measurements tonight however the spec for them is widely available. From memory, around 2m wide, 1.4m high in about a meter deep but that is just from memory.

[Ba55foreva]

Ok. Let me know a ball park price mate.

Elliott

[Chaz]

Ok. Let me know a ball park price mate.

Elliott

I'd be looking for around £3k. The 120 is a very good and accurate CNC lathe. European made quality, lots of cutting videos on YouTube showing them working.

It's got full floodcoolant which I've now managed to get working via Mach3.

Only niggle I have is the VFD is tempremental, replacement is just over £100, can take this off the asking price if happy with it like this.

Thanks.

[Chaz]

Actually, I did do a short vid sometime ago when doing a quick test part.

[Chaz]

I found some specs here:-


https://www.exapro.com/emco-pc-turn-...the-p30607031/





ISTANCE between centers 236 mm
Swing over bed 180 mm
Max Dia. Turning 75 mm
Carreras X / Z 55/172 mm
Max. Part length to 121 mm dish
MAIN SPINDLE
20.5 mm spindle bore
Bearing 45 mm dia
MOTOR HOME
Asynchronous AC motor 1.9 kW (2.55 hp)
Speed ​​range 150-4000 rpm
TRUCKS FORWARD
Fast forward to 5 m / min.
COUNTERPOINT
Racing upper 120 mm
Cane diameter 35 mm
ELECTRICAL CONNECTION
Input voltage 400 v 50/60Hz
Switching capacity 2.3 kVA
Up fuse max. 16 A
Dimensions (mm) 2130 x 1400 support bank x 1650 high
Weight (with bench support 550 Kg