Help needed to choose a machine.

[Clive S]

I've not pulled the trigger yet on the Acctek machine for a couple of reasons - one of them being Clive putting into my head the idea of building my own! I've been reading the build logs on this forum and I think that with some help from wiser heads than mine, a self-build might be feasible although the electrics side of things worries me a bit.

Chris Have you seen Joe's excellent build including the control box. Here is his channel https://www.youtube.com/channel/UCXl...iuKi2aixoM-cOA

You will get all the help you need from the guys on here to help with the questions.

[ChrisJ]

Morning, Clive.

Yes, I've been following Joe's build log and videos with great interest and respect. I'm impressed by what can be achieved with patience, a methodical approach, ingenuity and the guidance of the folk here. Not sure I'd be as brave with regard to routing aluminium by hand though, so I'd probably have to outsource some of the work.

Thanks for the link - the control box build doesn't look impossible but I'd need to do my homework as I've never done anything like that before.

I'll definitely start a build log in the next few days. I'm still doing my homework as I don't want to ask any questions that have been answered previously in these pages, and any design I come up with will definitely be a slight evolution of existing designs in order to accommodate the features I think I need.

But back to Sean - shippo.co.uk was the company that I approached re shipping from China. There is a lot of very useful info on their website and they were very helpful in answering my questions, so that would be my recommended first port of call. No pun intended...