Right chaps I need some help. I have Wired the spindle control board up to my planet cnc enclosure box as instructed by Planet themselves. However I am having difficulty in getting advice on how to get power to the spindle power pack.

Here is what I have done so far:

I have removed the potentiometer, capped off one wire and wired the 0-5v and gnd to the pin6 and gnd on the planet board. I have soldered the wires and heat shrunk them
Click image for larger version.  Name: black wire capped off.jpg  Views: 396  Size: 64.6 KB  ID: 22975Click image for larger version.  Name: gnd - 1.jpg  Views: 340  Size: 62.9 KB  ID: 22976Click image for larger version.  Name: gnd - 2.jpg  Views: 339  Size: 77.3 KB  ID: 22977Click image for larger version.  Name: gnd.jpg  Views: 349  Size: 75.5 KB  ID: 22978Click image for larger version.  Name: pin6 - 1.jpg  Views: 371  Size: 69.7 KB  ID: 22979Click image for larger version.  Name: pin6 - 2.jpg  Views: 349  Size: 72.2 KB  ID: 22980Click image for larger version.  Name: pin6 - 3.jpg  Views: 341  Size: 58.9 KB  ID: 22981Click image for larger version.  Name: pin6.jpg  Views: 352  Size: 95.4 KB  ID: 22982