My Cheapo Chineese 3020t mini CNC Build (more like improvements) leanring all the way

[ravihotwok]

Ah yes that makes sense except im not sure what wires go from the power pack to the spindle pcb. One main question though, at the moment, the power comes into the planet enclosure from the way via a kettle/pc like plug. It then goes to a switch on the front of the enclosure. It is then wired from the switch to the l, n and gnd of the enclosure power pack. If I link the L, N and gnd from here to the spindle power pack above would these cables handle it do you think or do I need to rewire in a thicker wire?

I have also wired the cable which goes to the spindle itself wrong, I have now connected this to the terminals which are labelled motor - & +.



Here is a few pics: