My Cheapo Chineese 3020t mini CNC Build (more like improvements) leanring all the way

[ravihotwok]

Nope, Planet said there was no need to?

[Clive S]

Nope, Planet said there was no need to?

That must be ok then The vast majority on here would disagree I think.

[Gary]

Screened cable without the screen being grounded is acting like un screened cable. so ground the screen at one end. It may not make a differnce, but if you have screened cable, it makes sence to use it how it is intended to be used.

[ravihotwok]

Thanks Gary, can you advise on how the best way to earth it please? can I earth it to the machine? or to the control box? Any examples?

Cheers

[ravihotwok]

Thanks Gary, can you advise on how the best way to earth it please? can I earth it to the machine? or to the control box? Any examples?

Cheers

[Gary]

in the control cabinet and to a star point.

and make sure the cabinet is also grounded.

[ravihotwok]

not too sure what a star point is, how do I connect it to the metal braid screening?

[Gary]

here is some reading for you.
https://en.wikipedia.org/wiki/Earthing_system

[Clive S]

not too sure what a star point is, how do I connect it to the metal braid screening?

This has been talked about many times on here try a search !! Read some of the build logs etc you don't seem to take advise when offered