EM806 drivers

[phill05]

Would anyone know if the RS232 cable needed to connect the driver to use Pro-tuner software, could I connect using a RS232 to USB please.

Phill

[Clive S]

Would anyone know if the RS232 cable needed to connect the driver to use Pro-tuner software, could I connect using a RS232 to USB please.

Phill

Have you seen this thread as there is some info here :- http://www.mycncuk.com/threads/11007...2492#post92492

I believe you can get a usb to serial adaptor you might have to reverse the tx and rx connections on the lead.

[phill05]

Thanks Clive,
Had not seen the thread, this is what I can get and would like to connect it to a laptop



Phill

[Clive S]

Thanks Clive,
Had not seen the thread, this is what I can get and would like to connect it to a laptop



Phill

That looks like a RJ11 to DB9 you would also need something like https://www.amazon.co.uk/USB-RS232-C.../dp/B00077DJIQ

or similar make sure you get a driver disc with it

edit you might have to reverse the tx and rx wires as I said in the last post

[Ger21]

As Clive said, you need both the cable you are showing, and a USB to RS232 adapter to plug it in to.

[Lee Roberts]

Did'nt really old laptops come with a COM port ?