Swiss backlash 0.01 mm new ??

I would have expected your picomax to have zero to 0-1-2 microns backlash.
I suspect the bs fixed end bearings are not properly adjusted/preloaded, or ..
.. your ballnut is loose/failed somehow and has no preload.

Easy enough to test.
Dti screw end, while loading back/forth with a prybar of some type, separately on screw end and on nut end/assy.
One should have a major deviation vs the other.


Quote Originally Posted by Agathon View Post
Spent the evening trying different permutations of the ball-nut assembly and the best I can achieve on both axes is 10 microns. If this were a conventional manual machine I'd be overjoyed with 4 tenths of a thou! In fact the very expensive Swiss machines that I sell have a backlash from new of around 0.01-0.02 mm.

Anyway, the machine is running very nicely and the back-lash compensation on Mach3 is working well.

As I frequently say to my customers "it's a metal cutting machine not a grinding machine" so I don't expect nor want to machine to tolerances better than +/- 0.005. I certainly don't think it will be a problem in respect of climb milling.

More soon...