Another Newbie looking for advice..

[GBR1]

Thanks all, yes a quick google search shows they are the same company..

Chaz, thanks for the link.. it looks like a good option, a bit more than I was wanting to pay. He is only 15min from me so I should investigate..

[Chaz]

Thanks all, yes a quick google search shows they are the same company..

Chaz, thanks for the link.. it looks like a good option, a bit more than I was wanting to pay. He is only 15min from me so I should investigate..

He is me.

Come look at the machine, perhaps we can work something out if it suits you.

[Boyan Silyavski]

He is me.

Go and see that one. There is nothing better to buy from a respected forum member

[Chaz]

A visit will be worthwhile, I can show you how the CAD to G Code stuff works too. I used to run a 3D Printing business, so can explain a lot to you. If anything, the knowledge alone will probably be worth a short trip.

I am home for most of the weekend - will be working on my machines, let me know if you want to pop around.

[Lee Roberts]

Sweeeet offers there Chaz nice one and thanks for offering !

Would be pretty kool if you did work something out on the machine exchange.

[GBR1]

A visit will be worthwhile, I can show you how the CAD to G Code stuff works too. I used to run a 3D Printing business, so can explain a lot to you. If anything, the knowledge alone will probably be worth a short trip.

I am home for most of the weekend - will be working on my machines, let me know if you want to pop around.

Hi Chaz,

Many thanks for the kind offer, sorry I have only just picked up on this.. I will see if I can pm you and arrange something.

Once again many many thanks..

[Chaz]

Hi Chaz,

Many thanks for the kind offer, sorry I have only just picked up on this.. I will see if I can pm you and arrange something.

Once again many many thanks..

No problem. We are away this weekend but welcome to pop around in the evenings (im typically home from around 19h30 or so).

[Clive S]

Thanks all, yes a quick google search shows they are the same company..

Chaz, thanks for the link.. it looks like a good option, a bit more than I was wanting to pay. He is only 15min from me so I should investigate..

Do a proper google search on MD reviews I have just had to sort a 8x4 MD machine out that was bought new a couple of months ago it was continually missing steps they had come back to it once but didn't fix it and they would not come back again. There was no earths on the machine frame or on the cable to the spindle. the bed was left 4mm out of level. Also it was supplied with a copy of Mach3 licence to MD.