Advice on buying servos.

[Ger21]

You can also do rigid tapping with UCCNC, and with Mach3/4 with the right motion controller.

[lp_felix]

You can also do rigid tapping with UCCNC, and with Mach3/4 with the right motion controller.

Hi Ger21, in fact I planing use uccnc. I have a spare Uc300 5lpt (from other unfinished project) I will read the manual.
Thanks for the tip.

Enviado de meu Redmi Note 4 usando Tapatalk

[Robin Hewitt]

If it is always the same tap, no pitch change, why not gear vertical displacement to rotation? Drive it with anything you like.