johan brink

[irving2008]

hi every one
i am a new member
i am building my own 3 axes cnc router cutter
i design it bussy building it, but one problem
the elctronics gets me under
the diagrams and the hardware is not the same
stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

email :[email protected]

Welcome Johan. Can you be a little clearer what the problem is with the electronics? The wiring for most 3 axis drives is usually pretty much the same whatever supplier/product. What usually gets people is the wiring between driver and motor. If you explain your specific problem we should be able to help...