. .

Thread: New start

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 28-03-2018 #1
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 14-06-2025 Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Congrats on getting her going, everyone cuts a circle lol.

    My first circles were off by about 1mm I read a post by Jazz about rising/falling edge so I flicked the jumper (No. 8 on my AM882) and now the sizes are correct.

    Here's Jazz's post
    http://www.mycncuk.com/threads/4513-...9450#post99450
    Last edited by Desertboy; 28-03-2018 at 01:58 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
  2. 28-03-2018 #2
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    Quote Originally Posted by Desertboy View Post
    Congrats on getting her going, everyone cuts a circle lol.

    My first circles were off by about 1mm I read a post by Jazz about rising/falling edge so I flicked the jumper (No. 8 on my AM882) and now the sizes are correct.

    Here's Jazz's post
    http://www.mycncuk.com/threads/4513-...9450#post99450
    Hmm have read about that a couple of times.
    Have to try it and see if there is accumulation.
    But for it to be real obvious I should write a program that takes the axis back and forwards ALOT of times to see if the position changes? :)

    Skickat från min SM-G955F via Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules