New start

[driftspin]

This might be it.. not power setting but background programs.
I have checked power settings and they are set to "always on"

I'm using my old home computer so there are all sorts of programs installed. Should test reinstall but I have no valid windows cds left. Stuff like that gets destroyed some were between child 2 and 4 ;)

Its still strange that it starts to happen after about 2h and not when running pockets and contours just 3d....

Skickat från min SM-G955F via Tapatalk

Hi nr1madman

Do you have fault relais from the drives hooked up to the emergency circuit?

Just guessing?


Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

[Nr1madman]

Hi nr1madman

Do you have fault relais from the drives hooked up to the emergency circuit?

Just guessing?


Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

Hey!

No I haven't gotten that far yet :)
The e stop circuit is made of e stop buttons and a momentary button driving/latching a relay.
This relay supply the signal to the bob for e stop and power the drives psu and vfd.

So in my thinking a fault in relay or e stop buttons would disable drives and vfd aswell...

Skickat från min SM-G955F via Tapatalk