New start

[Nr1madman]

Hey everyone!

Been away from mycncuk for about 6 months.. guess that all free time has gone to making chips and breaking bits :D

I havent done much to improve my machine exept upgrading from usb uc300 to ethernet.
I wish that I had taken everyones advice and gone that way from the beginning haha.. no connection issues since I swapped :)
I did try a z auto zero plate thingy but something is wrong with the offset. Measured my chinese touchplate and entered the height in the uccnc macro but when executing it gets the z zero a few millimeters to high so I have to find out why :)
Also made a primitive dustboot (yeeeah) its awsome!
Ordered the spindle speed controller thats discussed but havent installed it yet hehe

Other than that Im exited to be back here and want to see if there are new stuff being used by the members.. always fun to upgrade! :D

[driftspin]

Hey everyone!

Been away from mycncuk for about 6 months.. guess that all free time has gone to making chips and breaking bits :D

I havent done much to improve my machine exept upgrading from usb uc300 to ethernet.
I wish that I had taken everyones advice and gone that way from the beginning haha.. no connection issues since I swapped :)
I did try a z auto zero plate thingy but something is wrong with the offset. Measured my chinese touchplate and entered the height in the uccnc macro but when executing it gets the z zero a few millimeters to high so I have to find out why :)
Also made a primitive dustboot (yeeeah) its awsome!
Ordered the spindle speed controller thats discussed but havent installed it yet hehe

Other than that Im exited to be back here and want to see if there are new stuff being used by the members.. always fun to upgrade! :D

Hello Nr1madman

Good hear from you again.

Sorry to here about usb uc300 problems.

Post some pictures of your dustshoe!!

Grtz. Bert.


Verstuurd vanaf mijn SM-A320FL met Tapatalk