Okey.. now Im confused!

When running large 3d files I get ext e-stops.

The problem gets worse when the machine has been on for a longer period of time. (2-3h)

First I thought noise.. rerouted e stop cabeling.. no improvement.

Removed e stop pin in uccnc.. no improvement.
How can it trip ext e stop when it's not connected?
How do I change "debounce" in uccnc?

Is it my 5£ bob thats the culprit or maybe my computer?

Very annoying :)

Skickat från min SM-G955F via Tapatalk