Quote Originally Posted by Desertboy View Post
I considered using AC with my my AM882h's but when one of them blew and I replaced it I got an AM882 which is DC only.

I might be wrong here but I think if the drive is rated for AC you wouldn't need caps they're only there to smooth out the DC. That said it wasn't hard I was scared of the PSU build and yes I did blow one up ;) but it really was drill a couple of holes, bolt stuff on and solder 6 wires just double check you wiring and don't plug the wires into the rectifier the wrong way round.
Haha ;)

Well Im not scared of the process.. but I got a shitload of smaller caps so alot more than 6 solderpoints :D
Im about halfway through but I cant solder with any kids around.. they just have to touch everything ;)

I figured since the drives provide the motors with dc then some internal conversion must happen in the drives if using ac supply...?

Anyway.. it will look cool if I finish so I guess I will stick to the original plan!

Skickat från min SM-G955F via Tapatalk