Quote Originally Posted by Desertboy View Post
Congrats on getting her going, everyone cuts a circle lol.

My first circles were off by about 1mm I read a post by Jazz about rising/falling edge so I flicked the jumper (No. 8 on my AM882) and now the sizes are correct.

Here's Jazz's post
http://www.mycncuk.com/threads/4513-...9450#post99450
Hmm have read about that a couple of times.
Have to try it and see if there is accumulation.
But for it to be real obvious I should write a program that takes the axis back and forwards ALOT of times to see if the position changes? :)

Skickat från min SM-G955F via Tapatalk